Click To Call(689) 334-1209Click To Get A Free Estimate
Paver driveway in Lake Mary with a clean patch where an oil and rust stain was removed

Oil, rust and leaf marks lifted from your pavers

Paver Stain Removal in Lake Mary, FL

Stained Lake Mary pavers can look clean again, so call (689) 334-1209 for a free estimate.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 334-1209
Stain removal

Who removes stains from pavers in Lake Mary?

A local contractor treats stained pavers across Lake Mary, FL, and you hear back within 1 business day, usually much sooner. The estimate is free, and you can pass on it. To begin, call (689) 334-1209.

Stains are not all the same, and the wrong treatment can set one in or scar the paver. Oil, rust, leaf tannins, mildew and food drips each need their own approach. Cambridge Pavers calls stains a fact of life on any pavement, and says a paver that will not come clean can be replaced. Tell the contractor where each mark is and what caused it when you send in the short estimate form.

Call (689) 334-1209

What causes stains on Lake Mary pavers?

Most marks trace back to a short list of causes. Knowing yours tells a contractor what to treat and what to stop. To go through the list for your home, call (689) 334-1209.

Well water and sprinkler rust

Seminole County says reclaimed water is colorless and free of the minerals that stain driveways, unlike water from most shallow wells. Orange streaks near a sprinkler head can mean a well, or metal in the fixture. Batchelder and Collins lists sprinklers and patio furniture as common rust sources. Point out streaks when you send in the short estimate form.

Falling leaves

Wet leaves leave brown tannin marks, and Cambridge Pavers says the stains return every year because leaves fall every year. Sealed pavers resist them better. Share where the shade falls when you call (689) 334-1209.

Cars, grills and potted plants

Cars drip oil, antifreeze and brake fluid, Batchelder and Collins says, and cookout drips and plant saucers do the same on a patio. Unilock says pavers have fine capillaries that take in liquids like motor oil, wine and ketchup. Mention parking spots and the grill when you send in the short estimate form.

Mildew and algae in damp air

Orlando gets over 50 inches of rain a year, an Orlando paver company says, so shaded walks and lakeside corners stay wet and green. Mold marks come out with the right treatment, and they return where water lingers. To plan for it, call (689) 334-1209.

Paver driveway edge where one half has been treated for stains and the other half still shows rust and leaf marks

How do contractors match a treatment to each stain?

The match is the whole job. A product that clears oil does nothing for rust, and the reverse can harm the surface. A contractor tests one paver, then treats the area. To ask what the plan is for yours, send in the short estimate form.

Oil and grease

Surface oil comes up with a degreaser, and PROSOCO says deeper oil needs a poultice that dries in 5 to 8 hours and pulls it out.

Rust

Iron marks need a rust treatment made for pavers. Cambridge Pavers says several passes may be needed and that rust remover can damage sealer.

Leaf and tannin marks

Organic stains respond to oxygen-based or bleach-type treatments, tested on one paver first.

Mildew and algae

Algaecide treats the growth at the source, and a low pressure wash clears what it killed.

White haze

Efflorescence is natural salt. Unilock says it fades with time and can be removed with a product made for it.

Tire marks and tar

Black marks need a rubber and tar treatment, and Cambridge Pavers says replacing a marred paver can be easier.

Will pressure washing alone remove my paver stains?

Sometimes, but force is not the main tool. Western Interlock says to keep pressure under about 2000 PSI, because more can pull aggregate out of the paver, and Batchelder and Collins says a wide nozzle held at an angle keeps water out of the joints. A wash handles grime, not a stain that has soaked in. To ask which stains need treatment first, call (689) 334-1209.

Why a wash comes after treatment

Treating stains first, then washing, then refilling the joints leaves one clean surface. Western Interlock says to top off the sand after washing, since some washes out. Describe the stains when you send in the short estimate form.

Fresh stains are easier

Unilock advises acting fast on vehicle oil, and Cambridge Pavers says fresh spills should be soaked up before they set. A stain left for a season is harder than one left for a week. If you have a new mark, call (689) 334-1209.

Does efflorescence count as a stain on Lake Mary pavers?

It looks like one, but it is natural salt. Unilock says efflorescence is a whitish haze caused by salts in the materials that make the paver, and that it does go away with time. Western Interlock says rain usually clears it, and a cleaner exists if you do not want to wait. Clouded old sealer can look the same, so point out the haze when you send in the short estimate form.

New pavers

Unilock says to let it clear before sealing, which often takes two to three months and sometimes up to a year. A coat sealed over salts can cloud. Share the install date on a call to (689) 334-1209.

Old pavers

On older pavers, a white haze that never fades may be a failed coat instead, which is a restoration job. A contractor can usually tell with a small test. To ask, send in the short estimate form.

Should pavers be sealed after the stains come out?

Sealing is optional, but it makes the next stain easier to deal with. Unilock says a coat protects against water, dirt, oil, stains and UV fade. Outercle says never to seal over a visible stain, since the coat locks it in, and a Central Florida company says sealing over dirty pavers traps stains permanently. Treatment comes first, then drying, then the coat. To plan the order, call (689) 334-1209.

A coat helps next time

A sealed paver takes in liquid more slowly, which gives a spill time to be wiped up. It does not make a surface stain-proof. For the sealing details, see the paver sealing guide, then send in the short estimate form.

Rust remover and old coats

Cambridge Pavers says rust remover can damage a sealer, so a coated paver needs a test spot first. Tell the contractor if your pavers were sealed before, and call (689) 334-1209.

Want the marks gone from your Lake Mary pavers?

Send a photo-ready description or call, and a contractor replies within 1 business day, usually much sooner.

Call (689) 334-1209

Free, no obligation

Pricing

What does paver stain removal cost in Lake Mary?

No page read for Lake Mary lists a price for removing a single stain, so cost depends on size, stain type and whether the whole surface gets washed. Published pieces still help. An Orlando paver company lists washing alone at $0.15 to $0.75 per square foot, and Orlando-area companies list clean, sand and seal at $1.50 to $3.00. For a number on yours, send in the short estimate form.

An Orlando paver company says heavy staining and years of neglect add labor, and a Central Florida company says stripping failed sealer adds $500 to $1,000 or more. A stain that has gone deep into the paver costs more than one caught early. Holding a quote already? Read what it covers, or call (689) 334-1209 for a second look.

Stains sometimes point to bigger jobs, so see paver cleaning, restoration and every town served.

JobPublished rateExample on a 600 sq ft driveway
Washing alone$0.15 to $0.75 per sq ft$90 to $450
Clean, sand and seal$1.50 to $3.00 per sq ft$900 to $1,800
Strip failed sealer and reseal$3.50 to $5.00 per sq ft$2,100 to $3,000
Stripping added to a standard job$500 to $1,000 or moreAdded to the clean, sand and seal price
Treating one oil, rust or leaf stainNo rate publishedPriced at the visit

No page read for Orlando lists a price per stain, so this table sets published pieces beside each other. Washing, clean, sand and seal, and stripping and resealing come from an Orlando paver company, with the clean, sand and seal range matching other Orlando-area pages. The stripping add-on comes from a Central Florida company, read in November 2026. Quotes for your home may differ.

Get a Free Estimate

How often should Lake Mary pavers be cleaned to prevent stains?

A yearly wash keeps most marks from setting. An Orlando paver company recommends a maintenance cleaning every 12 to 15 months, and Batchelder and Collins suggests a general cleaning every few weeks for spots under grills and furniture. Shaded walks and pool decks may need it sooner than an open driveway. To plan a schedule, call (689) 334-1209.

Prevent the repeat stains

Move planters off the pavers, check the sprinkler heads, park on a mat if a car drips, and wipe food drips at once. Those habits cut most repeat marks. A contractor can map your trouble spots when you send in the short estimate form.

Seminole County sprinkler timing

The county bans watering between 10 a.m. and 4 p.m. year-round, and its limits cover wells and reclaimed water. Zones that spray one strip of pavers every watering day leave mineral marks. A contractor can note those zones when you call (689) 334-1209.

Surfaces

Which areas around a Lake Mary home get stained most?

Stains collect in the same places on most properties. A contractor starts with the ones you can see and checks the rest. To begin with yours, send in the short estimate form.

Driveways

Oil drips and tire marks cluster where cars park and turn, and rust shows up near metal edging.

Pool decks and lanais

Sunscreen oil, planters and metal furniture leave rings, and damp shade grows mildew.

Patios and grill areas

Grease, food and drink spills settle into the pavers under the grill and the table.

Entry walks

Mulch tannins, leaf stains and rust from a door mat or planter stand mark the walk to your door.

Contractor and homeowner kneeling by a paver walk to compare a treated stain with an untreated one
Photos

What do paver stain removal results look like around Lake Mary?

Homeowners waving from the garage of a stucco home beyond a long sealed paver driveway after stain treatment at a Lake Mary home
Sealed paver pool deck inside a screened pool enclosure after stain treatment at a Lake Mary home
Sealed paver patio under a wood pergola beside an outdoor kitchen and a pond fountain after stain treatment at a Lake Mary home
Sealed herringbone paver walkway leading to an arched front entry after stain treatment at a Lake Mary home
Close view of freshly sealed pavers with rich color after stain treatment at a Lake Mary home
Paver driveway with one cleaned half beside a stained half after stain treatment at a Lake Mary home
Contractor running a surface cleaner over a paver driveway after stain treatment at a Lake Mary home
Two contractors spraying and rolling sealer on a driveway after stain treatment at a Lake Mary home
How it works

What is the paver stain removal process, step by step?

The visit follows five steps, and testing comes before treating. The order below keeps the surface from being scarred and the coat from being harmed. To set a date, call (689) 334-1209.

1. Identify each stain

The contractor looks for oil, rust, leaf, mildew, food, tar and efflorescence marks and checks whether the pavers are sealed.

2. Test one paver

Cambridge Pavers says to test one paver before treating a larger area, since results differ by paver and coating.

3. Treat each stain

Each mark gets the treatment that fits it, and deeper oil may need a poultice that dries for several hours.

4. Rinse and check

The surface is rinsed at gentle pressure and checked, and stubborn marks get another pass.

5. Refill joints and seal if wanted

Joints are topped off with sand, and a sealer can follow once the surface is dry.

Questions

Frequently Asked Questions

How to get stains out of concrete pavers?

A contractor identifies the stain first, because oil, rust, leaf, mildew and food marks each need a different treatment. Cambridge Pavers, a paver maker, lists separate methods for each, and PROSOCO says surface oil comes up first and deeper oil needs a second pass. Blasting harder is not the answer, since Western Interlock says pressure much above about 2000 PSI can pull aggregate out.

What is the average cost to seal pavers in Florida?

Orlando-area company pages put a clean, sand and seal at $1.50 to $3.00 per square foot. Driveways sit at $1.50 to $2.50 and pool decks at $1.75 to $3.00 on one of them. A coat afterward makes later stains easier to rinse off.

Should pavers be sealed in Florida?

Sealing is optional, according to Unilock, but it helps in damp Central Florida. Unilock says a coat guards against water, dirt, oil, stains and UV fade. Orlando gets over 50 inches of rain a year, so green film and marks come back fast on bare pavers.

What not to use to clean pavers?

Avoid anything that scratches or etches. Western Interlock warns against pressure much above 2000 PSI, Acids can harm natural stone, and rust remover can damage sealer. A contractor tests one paver before treating the whole area.

Is it a good idea to pressure wash pavers?

Yes, at gentle settings and with new joint sand afterward. Western Interlock says to top off joints once the surface dries because washing removes some sand. A wide nozzle at an angle keeps the water from digging into joints, Batchelder and Collins adds.

Will reclaimed water stain my Lake Mary pavers?

Seminole County says reclaimed water is colorless and free of the minerals that stain houses, driveways and sidewalks, unlike water from most shallow wells. Orange marks near a sprinkler head on a well are more likely to be minerals or rust. A contractor can tell them apart.

Can rust stains come out of pavers?

Often yes, with a rust treatment made for pavers. Cambridge Pavers says several passes may be needed, and Unilock calls rust stubborn on natural stone. Batchelder and Collins says furniture and sprinklers are the usual sources. Treating before sealing matters, since rust remover can harm a coat.

Do oil stains from a car come out of pavers?

Surface oil usually does, and deeper oil often takes a poultice. PROSOCO says its poultice dries in 5 to 8 hours and pulls oil up out of the paver, with a second pass for severe stains. Fresh oil is easier than old, so earlier is better.

Why do leaf stains keep coming back?

The leaves keep falling. Cambridge Pavers says leaf stains return every year because leaves fall every year, and the decision may come down to the tree. Sealed pavers resist tannin staining better, and an annual wash clears what shows up.

What if a stain will not come out?

Replace the paver. Cambridge Pavers says one advantage of pavers over poured concrete is that a stain that cannot be removed can be fixed by swapping that paver. Batchelder and Collins says the same. A spare matching paver makes that easy.

Which towns near Lake Mary can get paver stain removal?

A contractor who treats stains in Lake Mary also works the towns below, from Longwood and Maitland to DeLand. Each one links to its own page. If your street is not listed, call (689) 334-1209.

Get the stains off your Lake Mary pavers

Name the spot that bothers you most, and a contractor replies within 1 business day, usually much sooner.

Call (689) 334-1209

Free, no obligation