Click To Call(689) 334-1209Click To Get A Free Estimate
Long paver driveway beside a stucco home with a sealed, even color

Deeper color and joints that stay full

Paver Sealing in Lake Mary, FL

Free paver sealing estimates for Lake Mary driveways, patios and pool decks start with a call to (689) 334-1209.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 334-1209

Who can seal pavers at my Lake Mary home?

A local contractor seals pavers throughout Lake Mary, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free, and booking stays your choice. To begin, call (689) 334-1209.

Sealing deepens the color, keeps joint sand in place and makes pollen, dirt and algae easier to rinse off. Picture the driveway after a long, wet summer, dull in the middle and sandy at the seams, then dark, even and tight again. Tires and oil hit the driveway, while splash and bare feet hit the pool deck, so every area needs a different plan. Describe how each one gets used when you send in the short estimate form.

Call (689) 334-1209

Contractors spraying and rolling sealer onto a driveway of pavers
What's included

What is included when pavers are sealed in Lake Mary?

A full job has four parts: a walk-through, a wash, fresh joint sand and the sealer coat. The wash and the wait for it to dry take up most of the time. To go over them for your house, call (689) 334-1209.

Walk-through

Square footage, loose pavers, old sealer, screen cages and standing water are noted before a price is set.

Wash

Algaecide goes on for mold, mildew and weeds, then a low pressure wash lifts the grime without blasting out sand.

Joint sand

Sand is swept into every gap and wetted to settle it, which locks the pavers and slows weeds.

Sealer coat

The product goes onto dry pavers in a thin, even pass at the rate on its label.

How can I tell my pavers need sealing?

Look for faded or chalky color, joints that sit below the paver edges, sand on the driveway after a storm and water that soaks in instead of beading. Green film on shaded corners is another sign. An Orlando paver company also suggests a maintenance wash every 12 to 15 months to stretch a coat's life. For a quick opinion, call (689) 334-1209.

Which sealer works for Lake Mary's humidity?

Find out which product the contractor has in mind, and the reason behind that choice. One Central Florida company calls water-based sealer the standard for the state, because moisture can escape through it, and says a low quality solvent product can turn white and peel in humid weather. Unilock adds that water-based sealer has less odor and helps stabilize the joint sand. To compare options for your pavers, call (689) 334-1209.

Solvent-based sealer has fans too. Unilock says it suits high-shine finishes and busy areas and can last four to five years, but the pavers and joints must be perfectly dry before it goes on. Ask what goes on each area, and why, when you send in the short estimate form.

Wet look or natural finish: which suits my home?

Pick a wet look for deep, rich color with some shine, or a natural finish to stay close to how the pavers looked new. Unilock warns that high sheen can be slippery when wet, and it names a penetrating matte as the option that keeps traction. Around a screened pool, footing matters more than shine. If your HOA has a view on gloss, ask before you send in the short estimate form.

How often should pavers be resealed in Lake Mary?

Plan on two to five years, a span that depends on the source. An Orlando paver company says 2 to 4 years, with sunny south-facing driveways nearer two and shaded pool decks nearer four. Unilock gives three to five years. If water soaks in rather than beading, the coat is thin. To have your coat checked, call (689) 334-1209.

Will extra coats of sealer protect pavers longer?

No, a heavier coat is not a longer lasting coat. Unilock says layering sealer in one spot leaves gloss swings, drip marks, lap marks and haze, and it adds that sealer will not wash off once it sets. One thin, even coat at the label rate does the work. Should a bid push three coats as bonus protection, ask the reason first, and then send in the short estimate form.

When is a good time of year to seal pavers in Lake Mary?

A dry stretch matters more than the month. Unilock asks for 24 to 48 hours of clear skies before sealing and up to 48 hours of dry weather after, with temperatures between 50 and 90 degrees and about 75 as the sweet spot. Fox 35 Orlando says the rainy season usually begins in late May and clears by mid-October, so fall and winter mornings give the most open days. Installed within the last few months? Mention the date on a call to (689) 334-1209.

New pavers have to wait 60 to 90 days first, since Unilock says efflorescence usually clears in two to three months and can take a year. Hot pavers can stain or peel, and sprinklers have to stay off while the coat cures. To lock in a day the forecast supports, send in the short estimate form.

Can sealing fix pavers that sank or shifted?

No, sealer cannot lift a low paver or close a gap. Unilock says sealing does not fix poor drainage or a base problem, so pavers that rock under a car or hold a puddle need repair first. Ask whether leveling is in the quote or priced apart when you send in the short estimate form.

Surfaces

Which areas around a Lake Mary home can be sealed?

A coat can go on the driveway, the screened pool deck, the back patio or the front walk. Wear differs from spot to spot, which is why one plan rarely covers all four. To begin on the corner that nags at you, send in the short estimate form.

Driveways

A driveway takes tires, oil drips and hot afternoon sun. Sealing a driveway pays off where the cars park and turn.

Pool decks under the screen

Chlorinated splash and bare feet wear a pool deck down. Sealing a deck should keep a safe grip underfoot.

Lakeside and backyard patios

A patio near a lake, a pond or a row of trees stays damp longer. Algae starts in those corners first.

Entry walks and courtyards

Entries pick up mulch, soil and potted plant drips. Sealing the walk to your door is a small job your guests notice.

Common problems

What causes paver trouble around Lake Mary?

Five problems come up again and again here: storm-season sand loss, damp-air algae, sprinkler marks, sun fade and old coats that failed. Each costs less to handle early. Which of them is yours? A call to (689) 334-1209 settles it.

1. Storm season washes Lake Mary joints

Orlando gets about 61 percent of its yearly rain in the rainy season, Fox 35 Orlando reports, and storms tend to form between 4 and 6 p.m. Sheeting water pulls sand from the joints, and low joints let pavers rock and weeds root.

2. Damp air feeds green film

A Central Florida sealer company puts humidity at 80 percent or more. Shaded pavers, north walks and spots beside a Lake Mary pond or lake stay wet longer, and algae follows.

3. Sprinkler spray on the same Lake Mary edge

Irrigation that hits one strip every watering day leaves marks and keeps it wet. A contractor can note those zones, and sprinklers have to stay off while a coat cures.

4. Sun fade on open Lake Mary driveways

Unprotected pavers lose depth in strong sun. A Central Florida company says cheap sealer breaks down in 6 to 12 months under that light, so the product matters.

5. Old coats that clouded or peeled

Trapped moisture can leave a whitish film, Unilock warns, and applying over an incompatible product does the same. A failed coat has to be stripped first, which adds time and cost.

Pricing

What does paver sealing cost in Lake Mary?

Expect about $1.50 to $3.00 per square foot in Lake Mary for the wash, sand and seal together. Castle Clean & Seal, a Central Florida company, lists driveways at $1.50 to $2.50 and pool decks at $1.75 to $3.00, and says larger jobs usually cost less per foot. It also lists a $1,000 project minimum, so a small walkway can feel pricey. Stripping failed sealer adds $500 to $1,000 or more on that page. For a number written for your home, send in the short estimate form.

Another Orlando company says quotes of $4 to $10 per square foot usually come from paver installers, not sealing specialists. If a number looks far from these ranges, ask what it covers. Holding a quote already? Read it against these figures, or call (689) 334-1209 for a second opinion.

Only a wash on your mind? Washing and joint sand have a guide of their own, the service area list lists every town, and Lake Mary paver sealing is back on the home page.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$450 to $900
600 sq ftTwo car driveway$900 to $1,800
1,000 sq ftLarge driveway or pool deck$1,500 to $3,000
1,500 sq ftDriveway plus pool deck$2,250 to $4,500

Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Screened pool with a sealed paver deck and a pond fountain in the background
Why choose us

Why hire a contractor who works Seminole County?

A contractor who works around Lake Mary already plans for storm-season delays and county sprinkler days. You still get the price on paper and time to decide. To begin, call (689) 334-1209.

Contractors who know Seminole County

A company that covers Lake Mary plans around afternoon storms and county sprinkler days. The first visit then comes with fewer surprises.

A visit with no bill

Looking at your pavers and writing the estimate costs nothing. If the number does not fit, you can say no and owe nothing.

Prices you can check

Central Florida companies post what they charge per square foot, and this site lays those ranges out in plain numbers. A bid well above or below them is worth asking about.

You set the pace

Ask for the price in writing and read it twice. The contractor standards page covers the details to confirm before you say yes.

Ready for a free paver sealing estimate in Lake Mary?

Call or send the short form, and a reply arrives within 1 business day, usually much sooner.

Call (689) 334-1209

Free, no obligation

Gloved hand sweeping sand across clean pavers beside a stained section
Photos

How do Lake Mary pavers look after a fresh seal?

Homeowners waving from the garage of a stucco home beyond a long sealed paver driveway at a Lake Mary home
Sealed paver pool deck inside a screened pool enclosure at a Lake Mary home
Sealed paver patio under a wood pergola beside an outdoor kitchen and a pond fountain at a Lake Mary home
Sealed herringbone paver walkway leading to an arched front entry at a Lake Mary home
Close view of freshly sealed pavers with rich color at a Lake Mary home
Paver driveway with one cleaned half beside a stained half at a Lake Mary home
Contractor running a surface cleaner over a paver driveway at a Lake Mary home
Two contractors spraying and rolling sealer on a driveway at a Lake Mary home
How it works

How does the paver sealing process work from start to finish?

Most jobs follow the same five steps, from the first walk-through to the final look. If you are ready to schedule, call (689) 334-1209.

1. Walk and measure

The contractor walks the property and measures each area for the sealing price. Low spots, loose pavers, old coats and screen enclosures get noted.

2. Treat, then wash

A biodegradable algaecide goes on first for mold, algae and weeds. A low pressure wash follows, with a fanned nozzle held about 12 inches away, as Unilock describes.

3. Set the joint sand

Fresh sand is swept in and wetted to settle it. That locks the pavers and slows weeds.

4. Let it dry

Unilock asks for at least 24 hours of drying after a wash in shade, and a few hours in warm sun. Rain in the forecast moves the day.

5. Seal and walk the job

On a sealing job, a sprayer lays the product down and a foam roller evens it out. Walk the finished area with the contractor and ask when feet and cars can return.

Questions

Frequently Asked Questions

How long does paver sealing last in Florida?

Between two and five years, depending on who you ask and how the pavers are used. An Orlando paver company says 2 to 4 years, and Unilock, a paver maker, says 3 to 5. A shaded pool deck may reach the long end, and a south-facing driveway the short one.

How much is paver sealing in Florida?

Orlando-area companies publish $1.50 to $3.00 per square foot for a clean, sand and seal. Driveways sit at $1.50 to $2.50 and pool decks at $1.75 to $3.00 on one company's page. For a 600 square foot driveway in Lake Mary, that is roughly $900 to $1,500.

What happens if pavers are not sealed?

They keep working, but they have less guard against moisture, oil, stains and sun fade. Unilock describes those as the main things a coat protects against. Joint sand also washes out sooner, and algae grips more easily in damp corners.

Is it better to spray or roll paver sealer?

Many contractors use both. Unilock lists a sprayer and a foam or short pile roller, and the roller smooths out puddles the sprayer leaves. A thin, even coat matters more than which tool laid it.

Is there a downside to sealing pavers?

Yes, a few. Sealing repeats every few years, a high sheen can get slippery when wet, and Unilock says a whitish film can form if moisture is trapped or the coat is too heavy. A dry day and the right product for each area avoid most of it.

Why is paver sealing so expensive?

Most of the cost is prep and labor, not the sealer. Algaecide, a careful wash, new joint sand and drying time come before the coat. Screen enclosures, tight access and old sealer to strip all add hours, and one Orlando company lists $3.50 to $5.00 per square foot for stripping and resealing.

Can pavers be sealed during Lake Mary's rainy season?

Yes, but the schedule gives way to the forecast. Fox 35 Orlando says the rainy season runs about five months from late May, and Unilock asks for 24 to 48 hours of clear skies before sealing. Contractors often work mornings and watch the radar for the 4 to 6 p.m. storms.

Do county sprinkler rules change when pavers can be sealed?

They can. Seminole County limits watering to two days a week from March to November and one day a week the rest of the year, never between 10 a.m. and 4 p.m. Unilock says to turn automatic sprinklers off near a fresh coat, so the contractor picks days when your zones are idle.

Does my HOA need to approve a sealer finish in Lake Mary?

Possibly. Many Lake Mary neighborhoods have associations, and Heathrow alone has about 30 sub-developments with their own, according to Wikipedia. Read your covenants before choosing a glossy finish, and ask the board whether a change in sheen needs a form.

How long should I stay off pavers after sealing?

Plan on a few hours for feet and about two days for cars. An Orlando paver company says water-based sealer is walkable in 3 to 4 hours and fully cured in 24 to 48 hours, and a Central Florida company asks for 48 hours before a car returns. The label has the exact times.

Ask what your Lake Mary pavers need next

Name your street and the spot that worries you, and a contractor gets back to you within 1 business day, usually much sooner.

Call (689) 334-1209

Free, no obligation