Click To Call(689) 334-1209Click To Get A Free Estimate

FAQ

Frequently Asked Questions

How much is paver sealing in Florida?

Orlando-area company pages put a clean, sand and seal at $1.50 to $3.00 per square foot. One of them lists a $1,000 project minimum, so a small walkway can cost more per foot than a big driveway. On 600 square feet in Lake Mary, that range works out to $900 to $1,800. For a number on your own pavers, send in the short estimate form.

How long does paver sealing last in Florida?

Expect two to four years from an Orlando paver company, or three to five years from Unilock, a paver maker. Full sun and a pool pull a coat toward the short end, and shade stretches it. A cheap sealer can break down in 6 to 12 months under Florida sun, according to one Central Florida company. To have your coat checked, call (689) 334-1209.

What happens if pavers are not sealed?

Nothing breaks overnight, but the surface gets less protection. Unilock lists moisture, grime, oil, stains and sun fade as the things a coat guards against, and it says sealing is optional. Without one, joint sand washes out sooner and mildew grips more easily in a damp year. To weigh it for your driveway, call (689) 334-1209.

Is it good to seal pavers in Florida?

Yes, when the color has faded, the joints are thinning or green film keeps coming back. Lake Mary gets the same rainy season as the rest of Orlando, with afternoon storms common from late May into October. A sealed surface sheds water and rinses clean more easily. To see if yours are ready, send in the short estimate form.

Does Seminole County's watering schedule affect sealing?

Yes, because sprinklers have to stay off while a coat cures. The county allows watering twice a week from March to November and once a week the rest of the year, and never between 10 a.m. and 4 p.m. Your contractor can pick a day when the zones are not set to run. To plan a date around your schedule, call (689) 334-1209.

Can I seal my pavers if my Heathrow HOA has rules?

Yes, but check first. Heathrow has about 30 sub-developments, and each one has its own homeowner association, according to Wikipedia. Some boards want to approve a change in how a driveway looks from the street, such as a move to a glossy wet look. To talk through finishes before you write your board, send in the short estimate form.

What does paver sealing cost for a Lake Mary pool deck?

A Central Florida company lists pool decks at $1.75 to $3.00 per square foot. A 400 square foot deck inside a screen enclosure would then run about $700 to $1,200, with the $1,000 project minimum that company lists in play. Screen enclosures and tight access can add labor. To price your deck, call (689) 334-1209.

Will sealer make my Lake Mary pool deck slippery?

It can, depending on the product. Unilock warns that high sheen finishes can turn slippery when wet and points to a penetrating matte as the choice that keeps traction. A Central Florida company also recommends a non-slip additive for travertine pool areas, at a small added cost. Ask about grip before you pick a finish, and call (689) 334-1209 to talk it over.

Contact Us Today for a Free Estimate

A contractor who serves your area can answer any other question.

Call (689) 334-1209

Free, no obligation