Click To Call(689) 334-1209Click To Get A Free Estimate
Long paver driveway at a Lake Mary home with even sealed color up to the garage

Even color and full joints where the cars park

Driveway Paver Sealing in Lake Mary, FL

One call to (689) 334-1209 starts a free estimate on sealing your Lake Mary paver driveway.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 334-1209
Driveways

Who seals paver driveways in Lake Mary, and how soon do they reply?

Local contractors seal paver driveways across Lake Mary, FL, and a reply reaches you within 1 business day, and often much sooner. The estimate is free, and nobody asks you to book on the spot. To start yours, call (689) 334-1209.

A driveway is the paved area people see first and drive on most. Tires turn on it, engines drip on it and the afternoon sun bakes it all summer. Sealer shields the color and keeps the sand in the joints, which holds the pavers tighter. Tell a contractor how many cars park there when you send in the short estimate form.

Call (689) 334-1209

Timing

How long is a driveway closed after it is sealed?

Longer than most people expect, because cars are the heaviest thing a fresh coat meets. Castle Clean & Seal asks for at least 4 to 6 hours off the surface for feet and at least 48 hours before a car comes back. Plan the days before you pick a date. To work out a schedule, call (689) 334-1209.

Where do the cars wait?

Two days without the driveway means the street, a garage that has room or a spot at a neighbor's. If a car must leave on a set morning, tell the contractor so the job can start the day after it is back. Mention your own constraint when you send in the short estimate form.

Foot traffic comes sooner

An Orlando paver company says water-based sealer is walkable in 3 to 4 hours and fully cured in 24 to 48. Solvent-based products can need up to 72. The product label gives the final word, so ask which one is on the quote. For a quick answer, call (689) 334-1209.

Contractor rolling sealer over a long paver driveway toward a Lake Mary garage door
Wear

What do oil, tires and summer sun do to a paver driveway?

Driveways collect three kinds of trouble that a patio never sees. Oil goes into the pavers, heat bakes the surface and turning wheels push on the joints. Each one has a different answer. To see which of these apply to yours, call (689) 334-1209.

Oil goes in before it shows

PROSOCO, a masonry products maker, says that cleaning a paver can reveal deeper stains once the surface dries. Removing them takes a poultice that needs 5 to 8 hours to dry, and severe stains may need repeat applications. That is why oil gets treated before the sealer, never under it. To mark the spots on your driveway, send in the short estimate form.

Heat, light and fading

Unilock lists UV fade resistance among the benefits of a coat, and it warns that hot pavers can stain and age prematurely during application. Its window for applying sealer is 50 to 90 degrees, with 75 ideal. A Lake Mary summer afternoon often runs hotter, so a contractor starts early. To book a morning, call (689) 334-1209.

Turning tires and loose sand

Unilock says sealing helps keep sand joints intact, which holds the pavers against the push of a turning wheel. It also says a coat does not fix drainage or a base problem, so a sunken stripe where the tires run needs repair first. To have it checked, send in the short estimate form.

Which sealer suits a driveway: penetrating, wet look or something in between?

Lurvey's, a hardscape supply company, says busy driveways may need stronger oil and water protection than a decorative patio does. That points toward a product chosen for the job, not for the shine. Your contractor should name it and say why. To ask, call (689) 334-1209.

Water-based or solvent-based

Unilock lists solvent-based sealer for high shine and high traffic, lasting 4 to 5 years with maintenance, but it needs fully dry pavers and joints. It lists water-based as lower in odor, easier to clean up and preferred when possible. A damp Lake Mary week favors the second kind. To compare, send in the short estimate form.

What the street sees

A wet look deepens color, and a natural finish stays quiet. Wikipedia says Heathrow is gated and has 30 sub-developments, each with its own association or sharing one, so a driveway visible from the street may fall under covenants. Read yours first, then call (689) 334-1209.

Pricing

How much does it cost to seal a paver driveway in Lake Mary?

Castle Clean & Seal lists driveways at $1.50 to $2.50 per square foot and prices 600 to 1,200 square foot driveways at about $900 to $3,000. Its example puts a 1,200 square foot driveway nearer $1.50 per foot, since larger jobs usually price lower. For your size, send in the short estimate form.

No company page gives a Lake Mary driveway rate of its own, so the table multiplies the published ranges for each size. A driveway with a failed coat belongs in the strip and reseal column, where Castle says stripping adds $500 to $1,000 or more. To learn which column fits, call (689) 334-1209.

Driveway sizeClean, sand and sealStrip and reseal
400 sq ft$600 to $1,000$1,400 to $2,000
600 sq ft$900 to $1,500$2,100 to $3,000
900 sq ft$1,350 to $2,250$3,150 to $4,500
1,200 sq ft$1,800 to $3,000$4,200 to $6,000
1,500 sq ft$2,250 to $3,750$5,250 to $7,500

The middle column multiplies the $1.50 to $2.50 per square foot Castle Clean & Seal lists for driveways, which matches its own $900 to $3,000 for 600 to 1,200 square feet. The last column multiplies the $3.50 to $5.00 an Orlando paver company lists for stripping and resealing. Both pages were read in November 2026. Large jobs often cost less per foot, and the $1,000 project minimum can lift a small one.

Get a Free Estimate

How it works

What is the driveway sealing process, from the first walk to the last roll?

Seven steps cover a typical driveway. Oil treatment is the step that stretches the schedule, because the poultice has to dry. To line up the visit, call (689) 334-1209.

1. Walk and mark

The contractor measures the driveway and marks oil spots, low pavers, old sealer and the sprinkler edge.

2. Treat the stains

Oil gets a poultice that draws it out, and PROSOCO says that can take 5 to 8 hours to dry.

3. Kill algae

A biodegradable algaecide goes on the green and black film, as Castle Clean & Seal describes.

4. Wash at low pressure

Unilock suggests a fan nozzle at about 30 degrees and 12 inches from the pavers, so the joints stay full.

5. Set the sand

Fresh sand is swept in and wetted, which locks the pavers against the pull of turning tires.

6. Dry out

Shaded driveways can need about 24 hours to dry, according to Unilock, with clear skies around the coat.

7. Seal and close the drive

The sealer is saturated on and rolled out evenly in one session, then cars stay off for at least 48 hours.

Driveway edge beside a Lake Mary lawn where a sealed paver border meets the grass
Site

Do live oaks and sprinklers change how a Lake Mary driveway is sealed?

Both do, and both are easy to plan around once they are on the table. Oak shade slows drying, and sprinkler spray can hit the same edge every watering day. To flag yours, call (689) 334-1209.

Shade under the oaks

The UF/IFAS describes live oak as an evergreen that reaches 60 to 80 feet tall and 60 to 120 feet wide. One tree can shade a whole driveway, and Unilock puts a cooler, shaded spot at about 24 hours of drying after a wash. Mention any canopy over the driveway when you send in the short estimate form.

The lawn sprinkler edge

Seminole County bans watering from 10 a.m. to 4 p.m. all year, and automatic systems need a working rain shutoff device. Unilock says to keep sprinklers off while a coat cures, since trapped water can leave white marks. Say which zones reach the driveway when you call (689) 334-1209.

What the county schedule means for your address

From March to November, even-numbered addresses water on Thursday and Sunday and odd-numbered ones on Wednesday and Saturday. A contractor can book around those days. For help comparing dates, send in the short estimate form.

Mistakes

Which mistakes cost the most before a driveway is sealed?

Four mistakes show up again and again, and the first three happen before any sealer is opened. Avoiding them costs less than fixing them. To have a contractor check yours, call (689) 334-1209.

Sealing too early

Unilock says new pavers should wait 60 to 90 days, because efflorescence can take 2 to 3 months, or up to a year, to fade.

Sealing over dirt

Castle Clean & Seal warns that sealing over dirty pavers traps stains permanently.

Skipping base repairs

Unilock says sealing does not fix poor drainage or a base problem, so a sunken or rocking paver needs repair first.

Sealing with hot pavers

Unilock says hot pavers can stain and age prematurely, so a contractor works within 50 to 90 degrees.

How often should a Lake Mary driveway be resealed?

Expect 2 to 5 years between coats. An Orlando paver company says 2 to 4, and Unilock says 3 to 5. Heavier use pushes toward the earlier end, and the same Orlando company recommends a maintenance cleaning every 12 to 15 months. To set a reminder with a contractor, call (689) 334-1209.

Service area

Which towns near Lake Mary can book driveway sealing?

A contractor who works Lake Mary also reaches Longwood, Oviedo, DeLand and the other towns below, and each one has a page of its own. A driveway in any of them follows the same steps described above. If your street is not listed, call (689) 334-1209.

Photos

What do sealed paver driveways look like in Lake Mary?

Homeowners waving from the garage of a stucco home beyond a long sealed paver driveway on a Lake Mary driveway
Sealed paver pool deck inside a screened pool enclosure on a Lake Mary driveway
Sealed paver patio under a wood pergola beside an outdoor kitchen and a pond fountain on a Lake Mary driveway
Sealed herringbone paver walkway leading to an arched front entry on a Lake Mary driveway
Close view of freshly sealed pavers with rich color on a Lake Mary driveway
Paver driveway with one cleaned half beside a stained half on a Lake Mary driveway
Contractor running a surface cleaner over a paver driveway on a Lake Mary driveway
Two contractors spraying and rolling sealer on a driveway on a Lake Mary driveway
Questions

What do Lake Mary homeowners ask about sealing a driveway?

How long does paver sealing last in Florida?

An Orlando paver company says 2 to 4 years, and Unilock, a paver maker, says many owners reseal every 3 to 5. A driveway with cars on it every day belongs near the short end, because Unilock notes that high traffic areas may need recoating sooner.

How much is paver sealing in Florida?

Published rates near Orlando start at $1.50 and top out at $3.00 per square foot for the full wash, sand and seal. Castle Clean & Seal, a Central Florida company, puts driveways at $1.50 to $2.50 and prices 600 to 1,200 square foot driveways at about $900 to $3,000. The table above shows the sizes in between.

Is it necessary to seal pavers in Florida?

No, Unilock calls sealing optional. A coat protects a driveway from water, dirt, oil and stains and helps keep sand in the joints, so it earns its cost where cars drip and park. A path that sees little traffic may not need one.

What are common mistakes to avoid when laying pavers?

Most of them happen before any sealer goes on. Unilock says sealing does not fix poor drainage or a bad base, and it says new pavers should wait 60 to 90 days. Castle Clean & Seal warns that sealing over dirty pavers traps stains permanently. A contractor checks all three first.

How long do I stay off a sealed paver driveway in Lake Mary?

Castle Clean & Seal asks for at least 4 to 6 hours off the surface for feet and at least 48 hours before a car returns. An Orlando paver company says water-based sealer is fully cured in 24 to 48 hours. Park on the street until the contractor says go.

Can oil stains be removed before a driveway is sealed?

Often, but the removal comes first and the coat second. PROSOCO, a masonry products maker, says cleaning can reveal deeper stains once the pavers dry, that a poultice takes 5 to 8 hours to dry, and that severe stains may need repeat applications. Sealing over an oil stain locks it in.

Does the driveway have to be dry before sealing in Lake Mary's rainy season?

Yes. Unilock asks for clear skies for 24 to 48 hours around application and says pavers in cooler shade need about 24 hours to dry after a wash. An Orlando paver company says the area gets over 50 inches of rain a year, so the contractor builds the schedule around the radar.

Should I seal a new paver driveway right away?

No. Unilock says to wait 60 to 90 days after installation so efflorescence, the white salt film, has time to fade, and it can take up to a year. Sealing early can trap that film under the coat. A driveway installed this summer should wait.

Do live oaks over my driveway change the sealing plan?

They can. The UF/IFAS describes live oak as an evergreen with a spread of 60 to 120 feet, so one tree can shade a whole driveway. Unilock puts a cooler, shaded spot at about 24 hours of drying after a wash, which may push the coating day back.

Can an HOA tell me what finish to use on a Lake Mary driveway?

Sometimes. Heathrow alone has 30 sub-developments, and each has its own association or shares one, according to Wikipedia. A glossy wet look can be seen from the street. Read the covenants for your neighborhood before choosing a sheen.

Ready to protect the driveway you pull into every day?

Call or fill in the short form, and a local contractor responds within 1 business day, often much sooner.

Call (689) 334-1209

Free, no obligation